⚡ Quick Actions
Live Camera
📷
Loading camera...
Temperatures
Nozzle
—
target —
Bed
—
target —
Chamber
—
ambient
AMS Filament
⚠️ HIGH HUMIDITYLoading...
Waiting for a fresh printer report
Humidity: —
🌀 Fans
Part Cooling
—
Aux Fan
—
Heatbreak
—
Speed & Controls
Speed Profile
Light
Print
🔥 Pre-heat Presets
📈 Temperature History
Nozzle
Bed
Chamber
📋 Print History — ▼
Loading print history...
🛡️ Print Guardian ACTIVE
AI-powered failure detection. Checks the camera at the configured interval during prints to detect spaghetti, layer shifts, and adhesion failures.
Status
Loading...
Last Check
—
Result
—
Checks / Failures
0 / 0
Est. Cost
$0.000
Phone alert status loading.
⏱️ Check Frequency
2min
Failure screening and phone alerts. Full Print Doctor reports have a separate schedule on the Kindle.
🩺 AI Print Doctor GPT-6 Astra · high
Use a current camera frame or upload photos for an AI assessment. A single image can be inconclusive; suggestions are not applied automatically.
📸 Drop images here or click to browse
Up to 4 images · JPG, PNG, WebP
⌨️ G-code Console
Send raw G-code commands. M112 (emergency stop), M999, M502, M500 are blocked for safety.
🔑 Printer Access Code
LAN access code for MQTT, FTP, and camera. When switching between LAN Only and Cloud mode, the P1S generates a new access code — update it here to restore all connections.
Current:
loading...
...
ℹ️ Systems updated when code changes
• .env — persistent storage across restarts
• MQTT — reconnects to printer with new code
• go2rtc — camera stream config + service restart
• FTP — file uploads/downloads use new code
• secrets — backup config updated